Truest Options for the Bolts You need

One of the advantages of working with polyvinyl chloride PVC pipes is that it does not require special cutting and shaping skills and offers you a choice of cutting tools that do not require complex equipment and tools. Pipe cutting can be done with no heat or even electricity. Hand tools are all you need. However, a PVC wastewater pipe should be cut as straight as possible to prevent future leaks. The use of the galvanized tc bolts comes quite useful here.

A water leak in the flush pipe can occur if the PVC inner seam does not fit properly with the cut pipe. There are several ways to cut the pipe. You can cut it simply with a cutter, a hand saw or even use a rope. Follow the simple steps outlined below to cut the PVC wastewater pipe.

Take Precautions

Wear a mask and goggles. This will protect your nose and eyes from any dust or debris that could come loose while cutting the tubing. After that, use a tape measure to measure the required pipe length before making the cut. Recheck the measurements to avoid unnecessary errors and material waste. You need to mark where you have to cut the tube with a marking pen or pencil.

Options for Cutting PVC Pipe

You can make pipe cuts in different ways and we’ll talk about the main types of PVC pipe cutters that exist. The choice of the right tool may depend on different factors such as availability, a number of PVC pipes to be cut and also its diameter:

For a long time, the main PVC cutting tool has been a bow saw. A saw that allows cuts in the PVC pipe quickly and cleanly. However, saws leave sharp edges and can leave plastic burrs behind which can make it difficult to assemble and glue PVC pipes to their joints. This is easily corrected by touching up the cut ends with fine sandpaper. Lightly sanding the cut edge eliminates burrs and edges and makes it easier to glue pipe that slides inside joints much more easily.

PVC pipe cutters

Manual tube cutters make it easy to cut at right angles through fast and accurate cutting. They are more intuitive alternatives to hand saws because they are easier to use and guarantee a perfect finish. These cutters are basically the same as metal pipe cutters with only a suitable PVC blade. The tool works gradually by tightening the cutter blade as you rotate the tool around the tubing. The tool ends up marking the tube each time you turn the tool until it cuts the entire pipe. This provides a clean, burr-free edge. It is also the fastest and cleanest way to cut PVC pipe.

PVC pipe shears

The tool acts as a kind of scissors, also ensuring an aligned cut, essential for those working with PVC chlorinated vinyl chloride tubes, a widely used coating material for water piping systems. This tool, despite being quite simple and compact, ensures greater possibilities of cuts, making it possible to cover specific and difficult to access regions of the property.

Electric tools

For larger PVC pipes, professional plumbers often use abrasive cutting discs or thin toothed saw blades coupled with circular or portable saws. Almost any electric cutter with a thin blade that cuts wood can be used to do the job.